<
>
Back to list

Analyse et régulation des processus industriels. Tome 1. Régulation continue


Authors : BORNE Pierre

BORNE Pierre

Master degree in Physics, Electronics, Mechanics and Applied Mathematics
Graduate Engineer from the IDN (Institut Industriel du Nord) – Lille,France
Ph.D. in Automatic control and Physics (University of Lille – France)

Position:
Professor at the "Ecole Centrale de Lille" (France), Dr. Borne is Director of Research and head of the Automatic Control Department of this institution.

Complementary information:
Dr. Borne has been nominated IEEE fellow in 1996. He received the Norbert Wiener Award from IEEE/SMC in 1998. Founder and president of the SMC Technical committee "Mathematical modelling" from 1993 to1997, he is presently president of the "System area" SMC committee. He has been IMACS vice-president from 1988 to 1994; he is chairman of the IMACS Technical Committee on "Robotics and Control System" and in 1997 he has been nominated Honorary member of the IMACS board of directors.

Field of publication:
Automatic control, robust control including implementation of fuzzy logic, neural nets and genetic algorithms

Author of numerous scientific articles, Dr. Borne published, co-authored or was the co-editor of the following titles:
In English:
– Systems and Control Dictionary (English-French, French-English) (Ed. Technip)
– Concise Encyclopedia of Modelling and Simulation (Pergamon Press)
– Mathematics of the Analysis and Design of Process Control (Elsevier)
In French with Editions Technip:
– Analyse et régulation des processus industriels
  - Tome 1. Régulation continue
  - Tome 2. Régulation numérique
– Commande et optimisation des processus
– Modélisation et identification des processus
– Automatique des systèmes continus. Éléments de cours et exercices résolus
– La commande par calculateur. Application aux procédés industriels. Avec 100 exercices et problèmes résolus
– Introduction à la commande floue
– Régulation industrielle : problèmes résolus
– Théorie et pratique du langage matriciel
– Automatique des systèmes échantillonnés. Éléments de cours et exercices résolus
– Identification et commande numérique des procédés industriels
– Dictionnaire d’automatique, de génie électrique et de productique (anglais-français, français-anglais)
 
  

, DAUPHIN-TANGUY Geneviève

DAUPHIN-TANGUY Geneviève

, RICHARD Jean-Pierre

RICHARD Jean-Pierre

Graduate Engineer from IDN (Institut Industriel du Nord) - Lille, France
Ph.D. in science

Position:
Professor of University, Research director at LAIL (Laboratory of Control and Industrial Informatics of Lille)

Field of publication:
Automatic control

Author of about 130 scientific articles, Dr. Richard published and co-authored 24 titles including:
In English:
- Applied Control (Marcel Dekker)
- Nonlinear Systems (Chapman & Hall)
  - Vol. 1. Modelling and Estimation
  - Vol.2. Stability and Stabilization
  - Vol. 3. Control
- Stability and Control of Time-Delay Systems (Springer Verlag)
- Stability and Control: Theory, Methods and Applications (Gordon & Breach)
In French:
- Analyse et régulation des processus industriels (Ed. Technip)
  - Tome 1. Régulation continue
  - Tome 2. Régulation numérique
- Commande et optimisation des processus (Ed. Technip)
- Modélisation et identification des processus (Ed. Technip)
- Systèmes non linéaires (Ed. Masson)

Complementary information:
Senior Member of the Institute of Electrical & Electronic Engineers (IEEE), member of the International Federation of Nonlinear Analysts (IFNA) and of the New York Academy of Sciences. Since 2000, Dr. Richard is also a member of the  Technical Committee on Linear Systems of the  International Federation of Automatic Control (IFAC) and of the Society of Electrical Engineers (SEE). 

, ROTELLA Frédéric

ROTELLA Frédéric

, ZAMBETTAKIS Irène

ZAMBETTAKIS Irène


ISBN : 9782710806424
trade paperback      16 x 24 cm      504 pages
Publication date : 1993



Le tome 1 reprend sans les développer les notions de base relatives au calcul opérationnel (transformée de Laplace et ses applications) et redéfinit l’ensemble des notions indispensables relatives aux signaux et systèmes dans l’optique de présenter les différentes méthodes d’analyse et régulation des processus continus. De nombreux exemples illustrent tout au long du texte la mise en œuvre des méthodes présentées. De plus, un chapitre entier est consacré à la résolution de problèmes pratiques de régulation.


Contents :


1. Processus et asservissement. 2. Éléments intervenant dans les processus asservis. 3. Signaux continus. 4. Fonction de transfert d’un filtre linéaire. 5. Graphes de fluence. 6. Représentation fréquentielle des fonctions de transfert. 7. Représentation d’un système continu dans l’espace d’état. 8. Comportement temporel des systèmes continus. 9. Signaux aléatoires continus. 10. Stabilité des systèmes continus linéaires. 11. Précision des systèmes asservis. 12. Observabilité et commandabilité. 13. Régulation continue. 14. Synthèse de régulations continues par l’abaque de Black-Nichols. 15. Méthodes simplifiées de synthèse de régulations continues. 16. Synthèse d’un asservissement continu par la méthode du lieu d’Evans. 17. Synthèse de régulations dans l’espace d’état. 18. Commande à minimum de variance, détermination d’un filtre optimal. 19. Réalisation pratique de réseaux correcteurs continus. 20. Systèmes non linéaires, linéarisation. 21. Approximation du premier harmonique. 22. Effet d’une non-linéarité placée dans la boucle de régulation. 23. Stabilité des systèmes continus non linéaires. 24. Méthodes d’identification. 25. Problèmes résolus. Bibliographie. Index.

Same authors books
Same field books